Sikasil® N-Plus Clear Sealant, 295ML, 24/Case
- Branch: Edmonton, Kelowna, Prince George
- Brand: Sika
SikaSil® N-Plus is a general-purpose, one-component, non-sag, elastomeric, 100% RTV neutral-cure silicone sealant. Note: The product contains an anti-microbial ingredient for improved mildew resistance.
- PRODUCT HIGHLIGHTS
- HOW TO APPLY
• Extremely long service life • Excellent flexibility for dynamic joint movement • Bonds to most substrates without priming • Ready to use, no mixing required • AAMA Certified component for window backbedding / glazing • All season ease of application
make sure the joint design is correct. Proper joint design minimizes stresses on the sealant. Use masking tape if desired for areas adjacent to the joint to be sealed to prevent surface contamination. Apply sealant to dry, clean surfaces. An air operated or hand operated cartridge gun may be used. Do not break cartridge seal until just before use. Surfaces should be dried before the sealant is applied. Normally sealant skins in 8 minutes, dries to touch in 1 hour, and bonds in 24 hours. This product is suitable for bulk dispensing straight from drums or pails by means of a pneumatic or hydraulic pump system.
The substrate must be clean, dry, frost free, sound and free of any oils, greases or incompatible sealers, paints or coatings that may interfere with adhesion.