Perma-Chink Lifeline Accents Clear Interior, 3.78 L

2_33602100
Perma-Chink Lifeline Accents Interior 1 Gallon
  • Branch: Calgary, Edmonton, Kelowna, Prince George
  • Brand: Perma-Chink
Perma-Chink Lifeline Advance works just like the clear-coat on your car to protect the color coat underneath. It extends the life of the finish system while adding depth and highlights to the appearance. It makes your exterior walls easier to keep clean. It has the right permeability to keep the film breathable while repelling liquid water. It's advanced formulation imparts an extra measure of water repellency and ultraviolet (UV) resistance along with mold and mildew protection to extend the life of your stain. Learn more about Perma-Chink.
  • PRODUCT HIGHLIGHTS
  • HOW TO APPLY
  • Excellent UV protection
  • Long lasting color retention
  • High coverage rate
  • Application temperature 40° to 90°
  • Breathable film allows unseasoned logs to dry out
All surfaces should be free from mill glaze and contaminates including dirt, dust, mold and mildew, old finishes, water repellents and wax. Use appropriate materials to clean and prepare surfaces. If a wood preservative has been previously applied, make sure it is completely dry before applying LIFELINE Interior. If the surface is tacky or there are visible deposits on the wood, wash the surface with water and allow to dry. DO NOT USE LIFELINE Interior ON SURFACES THAT HAVE BEEN BRUSHED OR RUBBED WITH STEEL WOOL. IF YOU DO, RUST SPOTS MAY APPEAR UNDER THE FINISH. Coverage is approximately 350-450 square feet per gallon for the first coat and approximately 600-800 square feet per gallon for subsequent coats depending on wood type and porosity. DO NOT USE THINNERS. STIR THOROUGHLY before and regularly during use. Wear rubber gloves to avoid stains to the skin and fingernails. DO NOT APPLY TO HOT SURFACES OR IN DIRECT SUNLIGHT. Do not apply when the surface temperature is below 40° F or above 90° F. Back brushing is required to work the finish into the wood for optimum performance. Apply LIFELINE Interior in thin coats and always keep a “wet edge” to avoid lap marks. Wait for the first coat to dry (at least two hours depending on temperature and humidity) before applying a second coat if desired. It is not necessary to apply two coats of LIFELINE Interior if the desired color is attained with one coat. Always back brush to ensure even coverage and to avoid visible drips and runs. Once the LIFELINE Interior has dried and you are satisfied with the appearance, we recommend the application of Acrylic Gloss or Satin clear topcoat.