Euclid Chemical


Euclid Chemical is a world leading manufacturer of specialty chemical products for the concrete and masonry construction industry. For over a century, Euclid Chemical has built a reputation on quality products and innovation with products such as admixtures, fiber, integral color, shotcrete, grouts, repair mortars, bonding agents, adhesives, coatings, curing and sealing compounds, dry shake hardeners, joint fillers, sealants, densifiers, waterproofing, repair and more. 

Shop Euclid Products

Eucoweld 2.0

 

Eucoweld 2.0 a liquid latex bonding agent for cement-based repair mortars and concrete.  Eucoweld 2.0 has a long open time, and repair materials can be placed either after it has dried, or while it is still wet.  This bonding agent represents a new generation of easy-to-use latex, which exhibits drastically improved performance  and stability in comparison to the typical re-wettable ethylene vinyl acetate (EVA) bonding agents currently available. EUCOWELD 2.0 is a unique, non-EVA based latex that utilizes reactive chemistry for bonding, rather than depending on the moisture content of the repair material.

FEATURES AND BENEFITS

  • Excellent bond strengths – far superior to those seen with EVA-based products 
  • Easy to use – applied to substrates straight from the container, with no dilution or mixing 
  • Can be used “wet on wet”– install repair materials immediately after application 
  • May also be allowed to dry – apply up to 7 days prior to repair material installation 
  • EUCOWELD 2.0 latex technology is not moisture sensitive after application like EVA-based products
  • Very low VOC content – can be used anywhere in North America

Technical Data Sheet

Sell Sheet

Solvent Based Sealers

Diamond and Super Diamond Clear 350 sealers are non-yellowing cure and seal compounds formulated with a unique exempt solvent blend that gives these products all the performance benefits of traditional solvent based curing and sealing products while ensuring compliance with VOC laws in regulated areas. Each respective formulation provides the required moisture retention necessary for proper cement hydration and strength gain, as well as protection from liquids, weathering, and abrasion. Diamond and Super Diamond Clear 350 can be tinted with Euclid Universal Color Packs, which are available in 33 standard colors.

FEATURES AND BENEFITS

  • Maintains adequate moisture in new concrete so that strength and durability properties can develop
  • Will not yellow under ultraviolet exposure
  • Slower drying than products based on acetone or tert-butyl acetate exempt solvents
  • Low VOC content
  • Can be tinted with Euclid Universal Color Packs to even out variegated concrete surfaces

Learn How to Apply Euclid Chemical Solvent Based Sealers to Concrete

DIAMOND CLEAR 350

Is a low VOC, non-yellowing concrete curing compound and cure & seal used to cure and seal exterior concrete. DIAMOND CLEAR 350 is formulated with a unique exempt solvent blend that gives this product all the performance benefits of traditional solvent based curing and sealing products while ensuring compliance with VOC laws in regulated areas. DIAMOND CLEAR 350 can be tinted with Euclid Universal Color Packs, which are available in 33 standard colors.

Diamond Clear 350 Technical Data Sheet

Super Diamond Clear Technical Data Sheet

SUPER DIAMOND CLEAR 350

Is a state-of-the-art concrete curing compound and cure & seal specially designed with a high solids formulation to provide the most efficient moisture retention for proper cement hydration and strength gain, as well as protection from liquids, weathering, and abrasion. SUPER DIAMOND CLEAR 350 is particularly well suited for exterior architectural concrete where membrane yellowing is undesirable. It is formulated with a unique exempt solvent blend that gives this product all the performance benefits of traditional solvent-based curing and sealing products while ensuring compliance with VOC laws in regulated areas. SUPER DIAMOND CLEAR 350 can be tinted with Euclid Universal Color Packs, which are available in 33 standard colors.

VERSASPEED 100

Versaspeed is a single-component, rapid hardening, low shrinkage, micro-fiber reinforced repair mortar for projects that require traffic or a non-breathable coating within hours. Repaired areas may be open to standard tire traffic 2 hours following the final set and an epoxy coating can be applied after 4 hours.

FEATURES AND BENEFITS

  • Very rapid setting 
  • Micro-fiber reinforcement controls plastic shrinkage cracking 
  • Polymer modified for excellent bond strength 
  • Low permeability 
  • Can be coated in as little as 4 hours 
  • Contains shrinkage compensation and reduction additives 
  • Excellent freeze-thaw durability 
  • Can be placed up to 4 in. (10cm) neat
  • Can be extended up 50%

Technical Data Sheet

EUCO QWIKJOINT UVR

Euco Quikjoint UVR represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. EUCO QWIKJOINT UVR resists fading from ultraviolet light greater than any existing product on the market. It is a fast-setting, semi-rigid polyurea, primarily used for filling construction and control joints in industrial and commercial concrete floors. EUCO QWIKJOINT UVR can be shaved flush with the floor shortly after placement or up to 24 hours later. EUCO QWIKJOINT UVR supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges. EUCO QWIKJOINT UVR is available in 33 standard colors and in a Neutral Base, that can be colored on site with EUCLID UNIVERSAL COLOR PACKS; available in the same 33 colors.

FEATURES AND BENEFITS

  • Unparalleled UV resistance
  • Fast setting formula reduces downtime
  • Large shave-time window allows for greater flexibility in scheduling joint filling operations
  • Tough performance reduces floor joint repairs and maintenance
  • Will cure in temperatures as low as -20° F (-29°C)
  • No bubbles/foaming when used in damp joints
  • Less moisture-sensitive than standard polyureas
  • Available in 33 standard colors

Technical Data Sheet

Sell Sheet