SikaGrout® 212 HP, 25 kg Bag
$42.08 / BAG
SikaGrout® 212 HP is a high-performance, non-shrink, fluid, cementitious grout with silica fume and a unique, two-stage shrinkage mechanism (compensating). Compensating for shrinkage in both the plastic and the hardened states. It is non-metallic, contains no chlorides and it may be placed at various consistencies ranging from flowable to fluid by simply adjusting the quantity of mix water.
- PRODUCT HIGHLIGHTS
- HOW TO APPLY
• Non-corrosive, does not contain chlorides •Low heat development • Superior freeze/thaw resistance Pre-blended for easy application and maximum field control. Just add water, mix and place • Versatile, can be applied in any consistency from dry pack to fluid by varying water content • Reducing water content accelerates strength development and ultimate compressive strength values
• Important: protect stored material from exposure to rain, condensation and high humidity as moisture may penetrate packaging, causing lumps • For best results, condition product to 18 to 29°C (65 to 84°F) prior to mixing and installation. Lower temperatures may result in slower strength development and longer cure times • Maintain wet grout, ambient and substrate temperatures between 5 - 32°C (41 - 89°F) for a period of 72 hours after initial placement unless using Sikacem® Accelerator • Minimum application thickness (neat without additional aggregate): 25 mm (1 in) • Maximum application thickness (neat without additional aggregate): 150 mm (6 in). Deeper applications are possible with the addition of suitable aggregate
The prepared grout may be pumped or transported to the forms in buckets or wheelbarrows and deposited without delay. External vibration and agitation of the grout in the forms are permitted. Grout having been prepared but not placed within 40 minutes after preparation shall be discarded. Prepared grout shall be agitated until use. Several hours after placement of grout (depending on ambient temperatures) forms may be removed and exposed grout shoulders may be trimmed or shaped to desired finish.