Sikatop® 110 Armatec Epocem 8 kg Unit

2_0300650
$206.50 / PAIL
Sika Armatec 110 EpoCem is a 3-component, solvent-free, moisture-tolerant, epoxy-modified, cementitious product specifically formulated as a bonding agent and an anti-corrosion coating.
QTY
  • PRODUCT HIGHLIGHTS
  • APPLICATIONS
  • HOW TO APPLY
• Excellent adhesion to concrete and steel • Acts as an effective barrier against penetration of water and chlorides • Long open time - up to 16 hours • Not a vapor barrier • Can be used exterior on-grade • Contains corrosion inhibitors • Excellent bonding bridge for cement or epoxy based repair mortars • High strength, unaffected by moisture when cured • Spray, brush or roller application • Non-flammable, solvent free
As a bonding agent - Apply by stiff-bristle brush or broom. Spray apply with Goldblatt Pattern Pistol or equal equipment. For best results, work the bonding slurry well into the substrate to ensure complete coverage of all surface irregularities. Apply the freshly mixed patching mortar or concrete wet on wet, or up to the maximum recommended open time, onto the bonding slurry.
Shake contents of both Component ‘A’ and Component ‘B’. Empty entire contents of both Component ‘A’ and Component ‘B’ into a clean, dry mixing pail. Mix thoroughly for 30 seconds with a Sika paddle on a low speed (400-600 rpm) drill. Slowly add the entire contents of Component ‘C’ while continuing to mix for 3 minutes until blend is uniform and free of lumps. Mix only that quantity that can be applied within its pot life.