- PRODUCT HIGHLIGHTS
- HOW TO APPLY
• Easy to use, labor-saving material • Easily applied to clean, sound substrate •Not a vapor barrier • High early strength • Freeze/thaw resistant • Specially suited for hot weather applications when extended working time is required
• Epoxy coatings can be applied as early as 6 hrs. On site testing is recommended for verification • Do not exceed 7 in. slump when extended • Do not feather edge • Use only potable water
The prepared mortar must be scrubbed into substrate. Be sure to fill all pores and voids. Force material against edge of repair, working toward center. After filling repair, screed off excess. Allow concrete to set to desired stiffness, then finish. If a smoother finish is desired, a magnesium float should be used. Mixing, placing, and finishing should not exceed 30 minutes maximum. To control setting times, cold water should be used in hot weather and hot water used in cold weather.