Sikalastic® Resoflex, 5.7L, Signal Grey

$311.81 / UNIT
A unique coating system specifically engineered to protect reinforced concrete structures subject to light to moderate traffic. It consists of a crack-bridging, waterproof, two-component, high solids, polyurethane coating containing factory added, synthetic aggregates.
• The synthetic aggregates rise to the surface of the coating to create a comfortable, non-slip, easy to walk on surface • Cost-effective and easy to apply • Long pot life for extended application time • Waterproof and weather resistant • Elastomeric and crack bridging • Outstanding UV resistance and non-yellowing • Abrasion resistant •
• Substrate temperature must be at least 3°C (5.5°F) above measured dew point temperature • Minimum/maximum ambient and substrate temperature during application and cure: 5°C/32°C (41°F/90°F). Monitoring of ambient and substrate temperature should always be done when applying polyurethane coatings. Note that low temperatures and low humidity will slow down the cure, and high temperatures and high humidity will accelerate it • Moisture content of the substrate must be < 4% by weight when coating is applied or use Sikafloor® 81 EpoCemCA
Apply to primed surface with with notched squeegee at a rate of 1.4 m2 /L (57 ft2/ US gallon) and backroll with a 12 mm (½ in) nap roller to achieve 27 mils wet film thickness. A 45 cm (18 in) wide roller provides the best results.