- PRODUCT HIGHLIGHTS
- HOW TO APPLY
• Ready to use • Easy to apply • Non-yellowing • Good penetration • Colourless and odourless • Improved chemical and abrasion resistance • Reduced dusting on lower quality concrete floors • Complies with today’s environmental, health and safety regulations • Canadian Food Inspection Agency acceptance
• Keep from freezing • Not effective on lightweight, extremely porous or worn concrete • Sikafloor® 3S is a colourless solution that will not alter the appearance of the concrete surfaces, therefore, it will not hide serious staining or excessive wear • Concrete less than 3 - 7 days old may contain excess moisture that will inhibit • Sikafloor® 3S penetration into the concrete surface and affect its ultimate effectiveness • For best results, concrete floors should be treated with liquid floor hardener at least 7 - 14 days after placement or after the cement has had sufficient time to hydrate • Do not apply to areas previously treated with membrane forming sealers unless these sealers have been completely removed
The concrete surface must be clean and sound. Remove any dust, laitance, grease, oil, dirt, curing agents, impregnations, wax, foreign matters, coatings and disintegrated material from surface.