Fastfloor CR Agate Grey 11L
$513.84 / KIT
Sikafloor Fastfloor CR is a two-component, solvent-free and low-VOC containing, epoxy binder and coating. Sikafloor Fastfloor CR provides extremely high chemical and mechanical resistance within a smooth or broadcast floor finish. It provides excellent protection for new or old concrete and properly prepared steel surfaces.
- PRODUCT HIGHLIGHTS
- HOW TO APPLY
• Environmentally friendly: low-VOC contents and low odour • Easily applied material, usually in a 2 coat application • Available in unlimited colour range with no minimum quantities required • Versatile, offers either smooth or broadcast (slip resistant) finishes • Fast curing: ideal for quick turnaround projects • Provides dust-free surfaces • Excellent chemical and wear resistance • Easily cleaned and maintained • Canadian Food Inspection Agency acceptance/USDA acceptance
• Protect from dampness, condensation and water contact during the initial 24 hour cure period • Surface may discolour in areas exposed to ultraviolet light, use Sikafloor® Duochem 942 (Clear or Coloured) as a seal coat if required • The influence of colour selection should be allowed for in material consumption/coverage. Light or bright colours may require higher wet film thicknesses or additional coats to achieve desired opacity
The surface must be clean, dry and sound. Remove dust, laitance, grease, oil, dirt, curing compounds, impregnations, waxes, foreign particles, coatings and disintegrated particles by any appropriate mechanical means, in order to achieve a profile equivalent to ICRI-CSP 3-4. Concrete compressive strength should be at least 25 MPa (3625 psi) at 28 days and at least 1.5 MPa (218 psi) in tension at the time of Sikafloor® Fastflor® CR application