Perma Chink Cedar Wash Log Cleaner, 9.5 L

$0.00 / EACH
Perma-Chink Cedar Wash is a ready-to-use cleaner specifically formulated for preparing the bare wood surfaces of wood species that contain high levels of wood extractives and resin oils. Cedar Wash is designed to remove surface resin oils and high concentrations of water-soluble wood extractives in addition to dirt, grease, grime, pollen, and surface mold and mildew without harming the wood.
  • Cedar Wash should be used on bare wood surfaces for prep only
  • Very Low environmental impact
  • It removes resin oils and wood extractives, dirt, dust and pollen
  • Will not harm existing wood finishes, chinking and sealants
The Cedar Wash is most easily applied using a pump-up garden type sprayer although a mop and bucket works too. Plan on cleaning small areas at a time since Cedar Wash needs to stay wet in order to do its job. Apply the solution starting at the bottom or the wall and work your way up. Work only an area big enough, so that the Cedar Wash is on the wall for about 10 to 15 minutes. Gently scrub the wall with a soft bristled brush to remove stubborn stains and heavily soiled areas. DO NOT ALLOW CEDAR WASH SOLUTION TO DRY ON THE SURFACE OF THE WOOD. Lightly mist water if Cedar Wash is drying too fast and adjust working area. Rinse the solution using a garden hose or low pressure washer thoroughly from the top down. REMEMBER: Apply Cedar Wash from the bottom up, and rinse from the top down. This will prevent streaks and drip marks.