Perma-Chink Log Home Cleaner, Log Wash, 3.78 L

$90.48 / GALLON
Perma-Chink Log Wash is a liquid concentrate for cleaning log and wood surfaces. It can be used as a maintenance cleaner or to prepare the surface of wood for a new coat of stain or topcoat. To prepare the surface of bare wood for a new coat of stain, Log Wash removes dirt, grime, pollen, and surface mold and mildew without harming the wood or the finish. As opposed to bleach solutions, Log Wash does not upset the natural pH balance of the wood, thus preventing wood fiber damage and iron tannate stains. The exterior of a log home is a settling ground for dust, pollen and other airborne contaminants that dull the surface and encourage mold growth. A light cleaning once or twice a year will keep a home looking beautiful and helps prolong the life of the exterior wood finish. Learn more about Perma-Chink.
  • Removes Dust, Pollen, Dust, Pollution
  • Environmentally Friendly
  • Will not harm existing finishes
  • Contains no chlorine bleach
Mix Log Wash with water according to the following specific instructions. To avoid damage to the surface, be sure to use the proper concentration for the job that you are performing. Clean only as much surface as you can manage without letting the Log Wash solution dry on the wall. Start by completely wetting the surface with mist setting on your hose. Apply Log Wash solution with a pump-up sprayer starting at the bottom of the wall and working upward. Leave Log Wash on the wall for 5 to 15 minutes. If necessary, scrub with a soft bristle brush to remove stubborn dirt. Rinse thoroughly starting at the top of the area, working downward. Each gallon of Log Wash solution should clean 150 – 250 square feet of wall surface. Avoid streaks by applying from the bottom of the wall upward, and DO NOT allow Log Wash solution to dry on the wall. Clean up spilled Log Wash with plenty of fresh water. Note: Rinse Log Wash off plants and shrubberies as soon as possible to avoid damage to them.