Perma-Chink 14" Log Boss Fastener, 150/Box

$202.66 / BOX
Perma-Chink Log Boss has a redesigned head for better counter sinking and a 5/16" hex head driver. Also, the wings have been brought back to reduce the friction between the wood and the shank and clear out the splinters created as the fastener pulls down into the wood. This reduces the torque required to set the fastener into place. Perma-Chink Systems specifically designed these fasteners for the construction of log and timber structures. Their 3" long thread provides the grip necessary for pulling even the most difficult logs into place while the larger shank diameter increases the overall strength and pulling power. Learn more about Perma-Chink.
  • No pre-drilling
  • Flat head design easily countersinks with maximum pulling power
  • Coated for minimum friction and corrosion protection
  • Made in USA
1. Mix 4 cups of Wood ReNew with 5 gallons of water and stir (if less than 5 gallons is required, mix 12 tablespoons of powder per gallon). Wait 10 minutes to allow the solution to thicken. Mix only enough solution to use in five hours. 2. Apply solution liberally to the surface with a mop, broom or brush. Clean from the bottom up, rinse from the top down. 3. Allow solution to remain on the wood for 10 minutes. If it begins to dry out, mist with a water hose. If necessary, use a broom or stiff brush to help clean the surface. 4. Rinse thoroughly with a pressure washer. We strongly recommend the use of pH Strips to verify adequate rinsing. Heavily stained or discolored areas may need a second application. Rinse plants shrubs and grass after use.