Perma-Chink 16" Log Boss Fastener, 150/Box
$281.35 / BOX
Perma-Chink Log Boss has a redesigned head for better counter sinking and a 5/16" hex head driver. Also, the wings have been brought back to reduce the friction between the wood and the shank and clear out the splinters created as the fastener pulls down into the wood. This reduces the torque required to set the fastener into place. Perma-Chink Systems specifically designed these fasteners for the construction of log and timber structures. Their 3" long thread provides the grip necessary for pulling even the most difficult logs into place while the larger shank diameter increases the overall strength and pulling power.
- PRODUCT HIGHLIGHTS
- HOW TO APPLY
- No pre-drilling
- Flat head design easily countersinks with maximum pulling power
- Coated for minimum friction and corrosion protection
- Made in USA
When the A and B components of M-Balm are mixed together, they form a low viscosity liquid. The easiest way to apply M-Balm is with some type of plastic squeeze bottle like a clean, empty mustard container. Just be sure to mix the two components together before you pour them into the container. You need to be aware that within a few minutes after being mixed together the liquid gets hot, very hot! The greater the volume the hotter it will get. The heat is the result of an exothermic chemical reaction that takes place between the A and B components. It's best to mix small quantities of M-Balm at a time not only for this reason but since mixed M-Balm hardens in just 15 minutes any product that's not applied within that time will end up being unusable. M-Balm can be applied with a brush but once the M-Balm begins to cure the brush will become hard and will have to be discarded. Whichever application method you use, try to avoid getting any M-Balm on the surface of the wood. It's impossible to cover cured M-Balm with a paint or stain and any spots of M-Balm that get onto the visible surface will always stick out from the rest of the wall.