Perma-Chink Osborn Wood Buffing Brush, 6" 80 Grit

2_33601456 MFG #: OB6-80
$0.00 / PIECE
Perma-Chink Osborn Wood Buffing Brushes are ideal for surface preparation after removing a finish by chemical stripping or media blasting. They are long lasting and features nylon fibers impregnated with Ultra Grit abrasive. Learn more about Perma-Chink.
  • Requires a buffer or polisher with 5/8 x 11 UNC threads, 10 amp motor, 600-3,000 RPM Variable speed
  • Nylon fibers impregnated with Ultra Grit abrasive
  • Long Lasting
The Cedar Wash is most easily applied using a pump-up garden type sprayer although a mop and bucket works too. Plan on cleaning small areas at a time since Cedar Wash needs to stay wet in order to do its job. Apply the solution starting at the bottom or the wall and work your way up. Work only an area big enough, so that the Cedar Wash is on the wall for about 10 to 15 minutes. Gently scrub the wall with a soft bristled brush to remove stubborn stains and heavily soiled areas. DO NOT ALLOW CEDAR WASH SOLUTION TO DRY ON THE SURFACE OF THE WOOD. Lightly mist water if Cedar Wash is drying too fast and adjust working area. Rinse the solution using a garden hose or low pressure washer thoroughly from the top down. REMEMBER: Apply Cedar Wash from the bottom up, and rinse from the top down. This will prevent streaks and drip marks.