- Home
- Featured Products
- Stella Custom Glass Hardware
Glass Hardware Solutions, Engineered and Ready to Take Home with You. Glazier approved for over 20 years, Stella is a trusted supplier in iconic glass projects. Canadian-owned and operated with all hardware designed by our in-house design team and fully engineer tested.
Stella Glass Hardware is now available exclusively from Brock White, Brafasco and National Concrete Accessories locations across Canada.
Spider Fittings
Face-Mounted - Single Arm
- Hex bolt M16 x 50 c/w washers (2) and spring washer
- Substrate Thk: 6 to 13mm [1/4” to 1/2"]
- SS Gd316, for fastening to steel
Suggested pairing: Stella articulating bolt
Face-Mounted - Two Arm Straight
- Hex bolt M16 x 50, c/w washers (2) and spring washer
- Substrate Thk: 6 to 13mm [1/4” to 1/2"]
- SS Gd316, for fastening to steel
Suggested pairing: Stella articulating bolts
Face-Mounted - Four Arm
- Hex bolt M16 x 50, c/w 2 washers and 1 spring washer
- Substrate Thk: 6 to 13mm [1/4” to 1/2"]
- SS Gd316, for fastening to steel
Suggested pairing: Stella articulating bolts
Side-Mounted - Single Arm
- Machined cap nuts (2), c/w threaded stud M12 x 40
- Substrate Thk: 6 to 13mm [1/4” to 1/2"]
- SS Gd316, for fastening to steel
Suggested pairing: Stella articulating bolt
Spider Fittings
Articulating Glass Bolts
Side-Mounted - Two Arm - "V"
- Machined cap nuts (2), c/w threaded stud M12 x 40
- Substrate Thk: 6 to 13mm [1/4” to 1/2"]
- SS Gd316, for fastening to steel
Suggested pairing: Stella articulating bolts

50mm [2"] Diameter Tapered Face
- Machined back nut
- Glass Thk: 10 to 21.5mm [3/8" to 7/8"]
- Substrate Thk: 6 to 13mm [1/4” to 1/2"]
- SS Gd316, for fastening to steel

60mm [2 3/8"] Diameter Tapered Face
- Machined back nut
- Glass Thk: 12 to 21.5mm [1/2" to 7/8"]
- Substrate Thk: 8 to 13mm [1/4” to 1/2"]
- SS Gd316, for fastening to steel

70mm [2 3/4"] Diameter Tapered Face
- Machined back nut
- Glass Thk: 24 to 40mm [1" to 1 5/8"]
- Substrate Thk: 8 to 13mm [1/4” to 1/2"]
- SS Gd316, for fastening to steel
Doc & Pin Fittings
Stand-off Fittings
Balustrade Fittings

50mm [2"] Diameter Tapered Face Adjustable Single Arm
- Glass Thk: 12 to 21.5mm [1/2" to 7/8"]
- Substrate Thk: 10 to 16mm [3/8” to 5/8"]
- C/W csk flat head screw M12 x 40 and machined back plate
- SS Gd316, for fastening to steel

50mm [2"] Diameter Tapered Face Adjustable Two Arm
- Glass Thk: 12 to 21.5mm [1/2" to 7/8"]
- Substrate Thk: 10 to 16mm [3/8” to 5/8"]
- C/W threaded stud M12 x 60
- SS Gd316, for fastening to steel

50mm [2"] Diameter Tapered Adjustable Stand-off
- Glass Thk: 12 to 21.5mm [1/2" to 7/8"]
- Socket cap screw M12 x 45, c/w washer and spring washer
- Substrate Thk: 6 to 13mm [1/4” to 1/2"]
- SS Gd316, for fastening to steel

50mm [2"] Diameter Tapered Clamp Plates
- Handrail Bracket* - Fastened to 38mm [1 1/2”] diameter rail
- Glass Thk: 17 to 19mm [11/16" to 3/4"]
- Machined - Duplex 2205 Stainless Steel *Guard load Tested
Perimeter Channel
Installation Tools

Non-thermally Broken 52mm W x 105mm H [2" x 4 1/8"]
- Glass Thk: 12 to 21.5mm [1/2" to 7/8"] Supplied in 3.65m [12'] lengths, c/w wedge and backer gaskets
- Aluminum 6063 - Clear Anodized Dry-glazed system

Thermally Broken 70mm W x 105mm H [2 3/4"x 4 1/8"]
- Glass Thk: 25 to 37.5mm [1" to 1 1/2"] Supplied in 3.65m [12'] lengths, c/w wedge and backer gaskets
- Aluminum 6063 - Clear Anodized Dry-glazed system

Speciality Install Tool needed for:
- Articulating Glass Bolts
- Stand-offs- Balustrades
- Side-mounted Spider




